

In order to validate your operations and activate the parameters for the Ethernet service, you must click on OK.If your ISP has given you other settings, like IPv6, proxy server for example (or other Ethernet settings), then press the button Advanced in order to fit them.The usefulness of these addresses is not guaranteed if you configure the IP parameters to use DHCP. All you have to do is enter the IP address of your ISP's DNS server and you're done! If your ISP provided you with search domain addresses, you will also need to enter them. Now select the tab AdvancedOn DNS then click on the button Add + under DNS Servers.Manually: you can select this option if you have received a specific IP address, for an subnet mask and router address from your ISP.Using DHCP with a Manual Address: you can select this option if you have received a specific IP address and that your ISP uses DHCP (or other network settings).Through DHCP ou Through BootP: choose one of these options if you have received a specific IP address and your ISP is using DHCP (or other network settings).Click on the menu Configure IPv4 (you will then have to refer to the configuration method recommended by your ISP).Go to the menu Apple (the little black apple located at the top left of your screen).If not, here are the steps to follow to enter your network settings: In most cases, just plugging an Ethernet cable into your laptop will be enough for the Internet connection to come up on its own. Once the requested verifications are done, you can then connect your Ethernet cable to your Macbook computer. Steps to Connect an Ethernet Cable to a Macbook Computer
